Connecting Your System
5
Connect the two included antennas
to your wireless NVR. This will
ensure you achieve the maximum
wireless range for transmission
from your wireless cameras.
1
Plug the other end of the
HDMI cable into the back
of your TV or monitor.
3
Plug one end of the included
HDMI cable into the HDMI port
on the back of the Wireless NVR.
2
Plug one end of the included
Ethernet cable into the LAN port
on the back of the Wireless NVR.
4
Plug the other end of the
Ethernet cable into a port
on the back of your router.
5
Plug the USB mouse into
the USB port on the back
of the NVR.
6
HDMI
ETHERNET
HDMI
You may also connect using VGA (not included)
Router Not
Included
ETHERNET
NOTE:
To view cameras, TV/Monitor must be
tuned to the same Input the HDMI is plugged into.
QSG-WNVR-V2.indd 6
2017/8/23 10:25
