Night Owl C20X Series, User Manual, Page: 31 / 86

31
A device can be added to the Night Owl Connect App by using the application’s Smart Auto Detection or
through a QR Code Setup. With Smart Auto Detection, your DVR will automatically be detected by the Night
Owl Connect software, making connecting easy! To use this preferred method, ensure your Smart Device and
DVR are both on the same network.
Connecting and Adding your Device
If your DVR and Smart Device are
running Night Owl Connect on the same
network, the Smart Auto Detection will
find your DVR. If this method is not
available, please use the QR Code Setup
from step 4B below.
Smart Auto Detection
To use the QR Code Setup, select Setup
device by QR Code and hover your Smart
Device camera lens over the QR Code
located on the top of your DVR.
QR Code Setup
Ethernet Cable
WIFI
NOTE: When adding a new device, it may take 5–10 minutes before you begin receiving notifications.
To begin adding a new device, first select the
yellow plus sign within the Device menu. Then
select your device type from the Device list and
follow the on screen instructions.
Adding a Device 4
4A
4B