Night Owl C20X Series, User Manual, Page: 28 / 86

28
The Date and Time Setup screen of the Startup Wizard will allow you to set the current date and time. You may
choose to use Network Time Protocol (NTP) to auto-configure the current date and time.
If your DVR is not connected to the Internet, the Secure Code will not be sent to your recovery email address.
In this case, the screen below will appear, please follow the instructions to contact Tech Support, an agent will
assist you in creating a new password for your DVR.
NOTE: In order to use Network Time Protocol (NTP), your DVR must be connected to the Internet.
NOTE: Forgot the admin password? Click the “Forgot PWD?” tab in the Startup Wizard and a Secure Code will be sent to your
recovery email address. Enter the Secure Code when prompted, then create a new password for the DVR. Your DVR MUST be
connected to the Internet to receive the secure code.
6.1.5 Date and Time Setup