Sailboat Twin Bunk Bed
Lits Jumeaux Superposés «Sailboat»
Assembly Instructions
Instructions pour l’assemblage
Page 1 of 10
Page 1 de 10
Certified:
This bunk bed conforms to all applicable consumer product safety standards
16 CFR PARTS 1213, 1500, 1513 and ASTM F-1427
Replacement Parts:
Replacement parts, including additional guardrails may be obtained from any
Night & Day Furniture Dealer.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
SAFETY WARNING
!
Use only mattress, which is 37 1/2" - 38
1/2" wide and 74"-75" long on the upper
and lower bunk (twin size.)
Ensure that the thickness of the mattress
does not exceed 6" and that the mattress
surface is at least 5" (127mm) below
upper edge of guardrails.
Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Prohibit more than one person on upper bunk.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD
– Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to hooks, belts
and jump ropes.
Keep these instructions for future reference.
WARNING:
Adult Assembly Required. This package contains small parts. Keep away from children.
N&D 1016
TM
The warning label on your bunk bed headboard is
there by law, and by law is not to be removed. The
adhesive used is difficult to peel off, will tear the paper
leaving a residue that is difficult to clean. We
recommend that you leave it where it is.
Note about Warning Labeling
SIZE OF MATTRESS AND FOUNDATION (TWIN TWIN BUNK):
Use only mattress, which is 37 1/2" - 38
1/2" wide and 74"-75" long on the upper
bunk (twin size.)
Use only mattress, which is 53" - 54"
wide and 74"-75" long on the lower bunk
(full size.)
Ensure that the thickness of the mattress
does not exceed 6" and that the mattress
surface is at least 5" (127mm) below
upper edge of guardrails.
SIZE OF MATTRESS AND FOUNDATION (TWIN FULL BUNK):
Twin Full Extension Kit
