TrackDrive (TD) Series
Operating & Safety Instructions
English/USA 12/09
38
6.3
Inspection/Service/Pre-Hire Check list
MACHINE SERIAL NO
TOWING
PASS
FAIL
N/A
Machine secured on trailer
Straps correctly positioned and tightened
Machine chocked if necessary
TRACK ASSEMBLY
Tracks are complete and engaged with drive sprockets
Track tension correct – grease in tensioner
Machine
climbs
slope
Brakes hold machine on slope
BASE
Operation of base control valve and buttons
Operation of all booms over full range
Wheel
bearings
OK
Cylinders are silent
Platform is level over full range
Booms, levelling rods not damaged or distorted
Booms levelling rods, cylinders not fouling
Hoses not tight, kinked or fouled
Operation of emergency hand pump
SLEWING
Slew assembly and motor are secure
Gearbox mesh correct, no excessive wear
No excessive back-lash
Slew wheel bolts secure
Slew guards secure
PLATFORM
Operation of control valve and buttons
Levelling lock valve holds in both directions, lines vented
Operation of all booms over full range
Cylinders are silent
Platform levelling over full range
Slewing smooth over full range
Operation of boom 4 over full range (if fitted)
No excessive movement of boom 4 and boom 3
Summary of Contents for TrackDrive TD150T Series
Page 2: ...Courtesy of Crane Market...
