SD Series
Operating & Safety Instructions
English/USA 09/03
12
3.3
PRE-OPERATIONAL SAFETY CHECK SCHEDULES
Before use at the beginning of the work shift, the aerial platform shall be given a visual inspection and
functional tests including, but not limited to the following. It is recommended that these be performed at
regular intervals as indicated on each checklist.
3.3.1
DAILY SAFETY CHECKS
1)
Check that all labels (decals) are in place and legible.
2)
Visually inspect the machine for damaged or loose components.
3)
Check that batteries are charged i.e. Charger has a solid green light and a pulsing red light.
4)
Check the fuel level (if applicable).
5)
Check that canopies/covers and guards are in place and secure.
6)
Check that the boom rest switch is operable (if applicable).
7)
Check that control levers are secure and operate freely.
8)
Check that operating buttons and emergency stop buttons function properly.
9)
Check the operation of the emergency hand pump.
10) Visually inspect all hydraulic hoses and fittings for damage or leaks.
11) Check operation of the stabiliser alarm.
12) Check that outrigger footpads are secure.
13) Check that the platform pivot pins and their tag bolts are secure.
14)
Check security and operation of the boom clamp.
15)
Check that the tilt alarm is functioning properly (On a slope of 5
0
or more the alarm should
sound and drive should be disabled)
3.3.2
WEEKLY SAFETY CHECKS
1)
Inspect tyres and wheels for damage and wear.
2)
Check tyres for correct pressure. 65psi (4.5 bar)
3)
Check battery fluid levels and specific gravity (after charging) and general condition.
4)
Check hydraulic oil level (ISO Grade 22).
5)
Inspect the engine air filter and clean or replace if necessary.
6)
Check operation and security of stabiliser micro switches in conjunction with the alarm
system.
7)
Inspect hose track for damage or missing parts.
Summary of Contents for 170SD series
Page 2: ......
