List of light bulbs used in the signalling system
license plate lamp
front position lamp
12V/5W fuse
rear position lamp
12V/5W bayonet
direction indicator
brake lights
fog lamp
12V/21W bayonet
LED lights can be used optionally.
6. BODYWORK
KITCHEN SET
COOLER
Coolers used by NIEWIADÓW Sp. z o.o. have three power sources:
- 230V
- 12V
- propane-butane gas.
A detailed description of the operation, use and technical data of the
cooler can be found in the supplementary manual (additional equipment).
INTERIOR HEATING
Caravans may be fitted with interior heating units powered by propane-
butane gas with a working pressure of 30mbar.
To start the heater:
- connect the gas cylinder through a suitable reducer
The kitchen set includes a gas stove and a sink. These items have dark glass
lids.
The stove is adapted for propane-butane gas combustion and can be connected
to a gas cylinder only through a suitable pressure reducer (30mbar).
When using a stove in the caravan, provide a continuous exchange of air to ensure
that there is sufficient air for gas combustion and for fumes to escape (open vents
or windows)
To light the burners:
- open the gas cylinder valve and the corresponding valve (applicable when the
caravan is equipped with more than one gas-consuming appliance) in the kitchen
cupboard,
-
light the lighter and bring it close to the burner holes,
- turn the valve knob of the selected burner from the "closed" position
counterclockwise to the low or high flame position, press and hold the knob until
the gas ignites.
To extinguish the flame, turn the knob to the "closed"
position.
When not using the stove, the gas cylinder valve should be
unscrew the heating valve located in the kitchen cupboard,
- turn the knob on the appliance (the gas in the appliance ignites
automatically).
When not using the heater, the valve in the kitchen cupboard that
supplies gas to the appliance should be closed.
A detailed description of the operation, use and technical data of the
heater can be found in the supplementary manual (additional equipment).
SEATING AND SLEEPING AREA
To create a seating area:
- attach the table hooks (mounted at the edge of the table) to the aluminium
slat (2) located on the caravan wall,
- unfold the table leg (4) by pushing the button (3),
- press down the buttons (1) of the table hooks.
To create a sleeping area:
- press down the buttons (1) of the table hooks,
- fold the table leg (4) by pushing the button (3),
- remove the table from the aluminium slat (2) and place it on the slat (6) while
laying the table on the bed edges (5).
closed.
1
7
NOTE !
The stove must be used in accordance with the information
contained in the stove manual which is supplied with the caravan.
It is prohibited to connect the stove directy to the cylinder without a
suitable reducer.
-15-
-16-
