Nielsen CT2880, Original Manual

Page: 5 / 32

SPECIFIC SAFETY INSTRUCTIONS FOR TYRE CHANGER USE
. Make sure this machine is used on a dry, flat, level, oil/grease free, concrete surface capable
of supporting the weight of the tyre changer, any additional tools, equipment and wheel tyre
combination.
. Before each use, always examine the tyre changer for structural cracks and bends, damage
to the safety guard, electrical wiring, and any other condition that may affect the safe operation
of the machine. Do not use the tyre changer even if minor damage is apparent.
. Maintain a safe working environment. Keep the work area well lit. Make sure there is
adequate surrounding workspace.Always keep the work area free of obstructions, grease, oil,
and other debris. Do not use the tyre changer in a damp or wet location. Do not use the tyre
changer in areas near flammable chemicals, dusts, and vapours.
. This tyre changer is designed for use with most passenger car and light commercial vehicle
wheels. Do not attempt to exceed this machine's maximum wheel diameter capacity.
. Always keep hands, fingers, and feet away from the moving parts of the tyre changer while
the machine is in use.
. Never leave the tyre changer unattended when it is running.After completing a tyre changer
job, always turn the Power Switch to its “OFF” position, and wait until the machine comes to a
complete stop before leaving.
. Make sure you read and understand all instructions and safety precautions as outlined in the
manufacturer’s manual for the wheel you are balancing, and the vehicle the wheel is to be
used on.
. Always unplug the tyre changer from its electrical supply source before performing any
inspection, maintenance, or cleaning procedures.
.
WARNING: People with pacemakers should consult their physician(s) before using this
product.Operation of electrical equipment in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.