22
Nieco Corporation - Model JF92G
EXTREMELY HOT! Be careful not to burn
yourself.
1. Grasp handle and lift Catalyst off to remove
from Shroud.
2. SOAK IN WARM WATER FOR 1 HOUR.
RINSE WITH WATER ONLY. NEVER USE ANY
CHEMICALS ON THE CATALYST.
3. Lay flat to drain water and let air dry overnight.
4. Make sure catalyst is dry before putting back
Incendalyst™ - If no perforated cap P/N 20860
Top
Tools
Instructions
Heat Resistant Gloves
Clean: Daily
CAUTION: Extremely Hot
EXTREMELY HOT! Be careful not to burn
yourself.
1. Lift cap from shroud collar.
2. Take to sink area and spray with degreaser.
3. Wash with a scrub pad, rinse, and sanitize in
the 3-compartment sink.
Perforated Cap - If no Incendalyst™ P/N 20058
Top
Tools
Instructions
Clean: Daily
3-Compartment Sink
Scrub Pad
Heat Resistant
Degreaser
CAUTION: Extremely Hot
