Nieco IRL-350, Instructions For Installation And Use Manual, Page: 45 / 48

EN
Instructions for use for the user p. 21/24
6. Start-up
6.1. Before initial use
Before first using the cabin, operate the infrared heater for around 30 minutes
and then ventilate well.
6.2. Infrared heater as “back heater”
If you are using the infrared heater for the back, a protective measure, such as a
suitable backrest, must be used to prevent unintentional contact.
CAUTION
Ensure a minimum distance of 40 mm between the surface of the skin
and the infrared heater.
6.3. Infrared heater as “front heater”
When used as a front heater, make sure that you do not permanently stare into
the heater.
CAUTION
Do not stare into the heater for an extended period of time.
7. Cleaning
Clean the front of the infrared heater with a soft cloth and warm water as necessary.
Do not clean using steam cleaners, high-pressure cleaners or spraying water.
8. Disposal
The packaging materials must be disposed of in accordance with the
applicable guidelines.
Old devices contain recyclable materials as well as harmful substances so
do not dispose of these as residual waste; ensure compliance with the
applicable regulations.