28
Nieco Corporation - Model JF64-2G
1. Scrape each shaft of both belts on the
discharge end with the wide end of the shaft
cleaning tool. The tool is located on the clip on the
discharge end of the broiler.
2. Wipe shaft cleaning tool with a towel.
Chain Shafts
Tools
Instructions
Clean: Daily
Shaft Cleaning
Tool
INNER HEAT SHIELDS
BELT ADJUSTMENT
Tools
Tools
Instructions
Instructions
Shaft Cleaning
Tool
1. Reach between the belt with the Shaft Cleaning
Tool to scrape deposits from the inner shield.
Discharge End
1. Remove return slide and stripper blade.
2. Loosen slotted crossbar bracket.
3. Pry on shaft to adjust belt.
4. Tighten bolts.
Clean: Daily
As Needed
