Nieaf Instruments NI 03, Manual

Page: 14 / 24

12
Safety Information
To ensure safe operation and service of
the Meter, follow these instructions.
Failure to observe warnings can result in
severe
injury or death.
- Avoid working alone so assistance can
be rendered.
- Do not use test leads or the Meter if they
look damaged.
- Do not use the Meter if the Meter is
not operating properly or if it is wet.
- Use the Meter only as specified in the
Instruction manual or the protection by
the Meter might be impaired.
- Individual protective device must be
used if hazardous live parts in the
installation where the measurement is
to be carried out could be accessible.
Symbols as marked on the Tester
and Instruction manual
Risk of electric shock
See instruction manual
Equipment protected by double or
reinforced insulation

Battery
Earth
Conforms to EU directives
Maintenance
Do not attempt to repair this Clamp Meter.
It contains no user-serviceable parts.
Repair or serving should only be performed
by qualified personal.
Cleaning
Periodically wipe the case with a dry cloth
and detergent do not use abrasives or
solvents.