76
OPERATING PROCEDURES
:
Blocking
The following will be performed simultaneously with blocking:
•The processing conditions and the lens layout data that were entered will be saved with the shape
data.
8
Take the lens OFF the lens table
1) “Please remove the lens” message is dis-
played in the screen.
2) Remove the lens.
3) Press the Blocking button or press the OK
button in the message.
The message closes and the lens detection criteria
is measured.
9
Store the blocked lens in a tray etc. with the JOB# on it.
Clearly mark the left- or right-eye lens on the tray etc. when storing the lens.
10
To block the other lenses subsequently, change the JOB# before tracing them.
• For the JOB data containing both-eye data, the shape data is automatically switched to the
one for the remaining eye as soon as one lens has been blocked.
• Be sure to close the message after removing the lens as the lens detection criteria when
message is closing influences the blocking accuracy.
Summary of Contents for ICE-1000
Page 1: ...INTELLIGENT BLOCKER Model ICE 1000 OPERATOR S MANUAL...
Page 8: ...VI...
Page 116: ...106 INDEX...
