■ Operating precautions
1) Avoid using or storing this product in the following places:
2) If this product is splashed with water, oil or chemical, wipe it off immediately.
3) Avoid cleaning this product with paint thinner or gasoline.
■ Before operation
Make sure that the package contents conform with your order.
Unpack the product, and check the following points:
Accessory list
■ Mounting the accessories
1) Screw the supplied operation lever into the lever boss as shown on the right.
2) Attach the cable grip to the stand body.
■ Appearance and principal part names
Specifications
Load capacity
200.0N
Slide height adjusting range
3 levels in 30 mm step
Stroke
50mm
Jig mounting hole
６－ M ６
Stand body weight
10kg
20 40-70-100 50 99.5
Cable grip
Force gauge
mounting plate
Operation lever
Cable grip
Operation lever
Stopper bolt
Lever stroke
Mounting bolt
FGC
FGN
FGX
Height adjusting range
(3 levels)
Height adjusting bolt
(at 4 places)
Measuring table
Slide assy
160
304
240
54
81
9
22.5
320
1) A place where this product is exposed to water, oil, chemical or dust.
2) A place where this product is exposed to vibration of other machinery.
3) A place where a high temperature (40℃ or higher) is expected.
1) Check the model and type indicated on the attached nameplate.
2) Check the product for damage attributable to transportation.
3) Check the accessories. (Refer to the following accessory list.)
Item
Quantity
Cross-recessed pan head screw, M4 x 8, For FGC/FGN
４pcs
Cross-recessed pan head screw, M5 ×６ For FGX
３pcs
Hexagon wrench, 5 mm
1 pc
Cable grip
1 pc
Socket head bolt, M6 x 16 (for Jig mounting)
２pcs
Set screwM6 x 20 (for film chuck)
1pcs
Plain washer, M6
２pcs
Operation manual
１copy
Summary of Contents for FGS-5S
Page 1: ...ASSY FGS 5S...
