FGX
(old model)
84
～
294
(8levels in 30mm step)
341
290
53
19
9
562
99.5
50
22.5
230
94
FGJN
FGP
FGPX
■ Operating precautions
1) Avoid using or storing this product in the following places:
2) If this product is splashed with water, oil or chemical, wipe it off immediately.
3) Avoid cleaning this product with paint thinner or gasoline.
■ Before operation
Make sure that the package contents conform with your order.
Unpack the product, and check the following points:
Accessory list
Item
Quantity
Cross-recessed pan head screw, M4 x 8, For FGJN/FGP/FGPX
４pcs
Cross-recessed pan head screw, M5 ×６ For FGX （old model）
３pcs
Hexagon wrench, 5 mm
1 pc
Cable grip
1 pc
Socket head bolt, M6 x 16 (for Jig mounting)
２pcs
Set screwM6 x 20 (for film chuck)
1pcs
Plain washer, M6
２pcs
Operation manual
１copy
■ Mounting the accessories
1) Screw the supplied operation lever into the lever boss as shown on the right.
2) Attach the cable grip to the stand body.
■ Appearance and principal part names
Specifications
Load capacity
500.0N
Slide height adjusting range
8 levels in 30 mm step
Stroke
50mm
Jig mounting hole
１４－ M ６
Stand body weight
15kg
F o r c e g a u g e
mounting plate
Operation lever
Cable grip
Operation lever
Stopper bolt
Lever stroke
Mounting bolt
Height adjusting range
Height adjusting bolt
(at 4 places)
Measuring table
Slide assy
1) A place where this product is exposed to water, oil, chemical or dust.
2) A place where this product is exposed to vibration of other machinery.
3) A place where a high temperature (40℃ or higher) is expected.
1) Check the model and type indicated on the attached nameplate.
2) Check the product for damage attributable to transportation.
3) Check the accessories. (Refer to the following accessory list.)
Cable grip
