Nidec DT-3015N, Instruction Manual

Page: 35 / 41

33
5 Specifications
5.1 Specifications list
Internal
oscillation
emission
Emission count 30 to 35000 fpm
Resolution
30.0 to 5000.0
：
0.1 fpm
to 8000.0
：
0.2 fpm
to 10000.0
：
0.5 fpm
to 35000.0
：
1.0 fpm
Phase change function Available (PHA mode)
Jump function Available (
press “×2” and “÷2” while on INT)
Limit function Available (configurable in function mode 5)
Integer function Available (configurable in function mode 1)
Delayed emission function
Measurement range
：
30 to 35000 fpm
Within the range (angle)
：
0 to 359°, available to set by1°
Within the range (time)
：
0.00 to 999.99 ms, available to set by 0.01 ms
1000.0 to 1994.4 ms ,available to set by 0.1 ms
External
synchronous
emission
Input signal
H level
：
2.5 to 12 V
L level
：
0 to 0.5 V
Pulse width : 50 µs or more
*Input impedance : 10
kΩ or more
Frequency measurement range 27 to 35020 fpm
Phase change function Available (PHA mode)
Resolution 1 fpm
Delayed emission function
Measurement range
：
27 to 35020 fpm
Within the range (angle)
：
0 to 359°, available to set by1°
Within the range (time)
：
0.00 to 999.99 ms, available to set by 0.01 ms
1000.0 to 2216.0 ms ,available to set by 0.1 ms
Display 6-digit 7 segment red LED
Setting devices Multi-turn encoder, tact switch
Lamp
Emission source Xenon Lamp
input 15 W
Emission pulse width
20 μs
Emission timer
Emission continuously or automatically stop in 1 to 120 [min]
(adjustable in function mode 3)
Saving function
Power OFF saving
Memory saving ( SELECT number)
Power supply for sensor DC12V 40mA
Power
Built-in NiMH battery
•Charging time
: Approx. 2 hours
•Continuous emission time
Approx. 3 hours (when the emission count is 1500FPM)
Supplied AC adapter
•Input: AC 100 V to 240 V 50/60Hz
Operating temperature 0 to 40°C (32 to 104°F)
Operating humidity 45 to 85% (Non- condensing)
Protection structure None
Weight Approx. 1.9 kg ( main unit only) (4.2lb)
Notes
*1 The lamp may flicker in high frequency, but it is not failure. It can be measured by instruments so please continue to use it.
*2 If noise causes signal integrity issues from the external input sensors, please take measures such as connecting a ferrite
core to the signal line.