4
2.2 How to take on/off the Grip
2.3 How to put on the Rubber cover
3
Part names and functions
3.1 Main unit
Please put on the Grip (one of included accessories) before use.
Insert the screw into the holl on the bottom of main unit,
and turn the knob crockwise to tighten the screw.
This can be attached to the tripod for cameras.
Please use the one has a designated screw.
*1/4-20 UNC under 8 mm long
Xenon Lamp
Power Switch
Power Cable
Operation Panel
External signal I/O connector
Body buttom
Screw hole
for the Grip
Grip
Knob
Please put on the Rubber cover (one of included accessories) before use.
Fit the groove inside the rubber cover with the outer plastic frame on the
front of the main unit, and attach it.
*Do not pull the cover forcibly.
It may cause damage.
