40
Commander S100 User Guide
5.4 Using the keypad
The Commander S100 has four keys as can be seen in Table 5-3 below.
Table 5-3 Key functions
PIN Entry
Enter the security PIN to view or edit the selected parameter
Binary value display
A binary parameter
(Bit 3 is shown as active in example)
Drive Display
Text
Detail
Bit
1
2
3
4
5
6
7
0
Setting button
-
Used to navigate through the drive parameter settings and rotate displayed parameters when the drive is
running.
STOP / RESET button
- Used to reset the drive if there is an error or to stop the drive running if the Run / Stop
configuration is set appropriately.
UP & DOWN buttons
- Individually used to increase or decrease editable values shown on the drive display. Holding down
a button will scroll between menus or move the cursor if editing a parameter.
UP & DOWN buttons
- If pressed together, they provide the drive with a run signal if the Run / Stop configuration is set
appropriately.
Summary of Contents for COMMANDER S100
Page 118: ...0478 0650 02...