Nicols XMOV 2, User Manual

Page: 13 / 15

12-
2) P
ress the “SETUP”, enter the menu to setting the sensitive of the sound active
mode
“×××”
3) P
ress the “UP” or “DOWN” to set up the sensitive value 0-31. It will be more
sensitive when the value is bigger.
Local information for the program version
——
8. Info
1) P
ress the “MODE”, enter the menu to check the local information for the
program version
“8. Info ”
2) P
ress the “SETUP”, enter the preview menu for the program version
information of the local
“display”
、
“motor”
、
“dimmer”
3) P
ress the “UP” or “DOWN”, it will show “display”
、
“motor”
、
“dimmer”version
information
 “display”——display board program version No.
 “motor”——electrical control panel program Version No.

“dimmer”——dimming control panel program version No.
Recover factory reset
——
9.Default
1) P
ress the “MODE”, recover factory reset menu“ 9.Default”
2) P
ress the “SETUP”, recover factory reset menu “No”/“Yes”
3) P
ress the “UP” or “DOWN” to choose the recover factory reset.“No” no function
“Yes” all of the menu will return back to the factory reset.
DMX Working mode 1 : 12 channels
Channel Value Function
CH1 Pan (0-255) X axis
CH2 Pan fine (0-255) X axis fine tuning
CH3 Tilt (0-255) Y axis
CH4 Tilt fine (0-255) Y axis fine tuning
CH5 Pan /Tilt Speed (0-255) X/Y axis speed
CH6 Dimmer (0-255) Master dimming
CH7 Red (0-255) Red dimming
CH8 Green (0-255) Green dimming
CH9 Blue (0-255) Blue dimming
CH10 Strobe (0-255) 0-20HZ strobe