Nicols XMOV 2, User Manual

Page: 12 / 15

11-
not.“NO”moving direction will not opposite /“YES”moving direction will
opposite
Y axis moving direction forward or reverse setting
——
4.InverT
1)
Press the “MODE”, enter the menu to set up the Y axis moving directions
forward or reverse
“4.InverT ”
2)
Press the “SETUP”,Y axis moving direction forward or reverse setting
menu“InverT1”/“InverT2”
InverT1 : set up the directions for the first light whether forward moving or
InverT2 : set up the directions for the second light whether forward moving or
not.
3)
Press the “UP” or “DOWN”, choose the Y axis direction is opposite turning or
not.
“NO”moving direction will not opposite/“YES”moving direction will
opposite
DMX channel setting
——
5. Channel
1)
Press the “MODE”,DMX channel setting menu “5. Channel”
2)
Press the “SETUP”, setting the DMX channel “Mode1”/“Mode2”
3)
Press the “UP” or “DOWN” to choose the DMX channel.“Mode1” 12
channels/“Mode2”14 channels. More details for the channel, please
check the form as below
Working mode setting
——
6. Run
1) P
ress the “MODE”, enter the menu to setting the DMX channels “6. Run”
2) P
ress the “SETUP”, setting the DMX channel “Dmx”/“FOOT ”“Slave”/
“Auto1-10”/” Sound”
3) P
ress the “UP” or “DOWN” to choose the DMX channel.
 “Dmx”——DMX working mode
 “FOOT”——foot switch control mode
 “Slave” ——slave mode
 “Auto1-10” ——auto running mode
，
there are from 1-10 auto
running programs
 ” Sound” ——sound active mode
Sensitive of the sound active mode settings
——
7.Sound
1) P
ress the “MODE”, enter the menu for the sensitive of the sound active mode
“7.Sound”