a.
Make sure the DMX mode is activated.
b.
Make sure the cables are of good quality and the connections are properly made.
5.
In DMX mode, the laser is not controlled by the DMX console, DMX signal indicator flashes. Make sure the console and the units
have the same channel.
6.
If the direction of the beam is not correct, restart the machine.
7.
If the unit does not work properly, turn the unit off then back on.
If the unit meets other operational problems, we recommend that you contact your dealer.
TABLE SET DMX ADDRESS
Summary of Contents for X-RAY LASER
Page 9: ......
