Nicols BLUE FIVE, User Manual

Page: 15 / 22

OPERATION OF THE UNIT
The use of lasers is out of the reach of people when considering:
-
That the unit is situated at 3 meters above the floor at least
-
That a safety area is defined within 5 meters radius
-
The user takes the responsibility that the units under 3B class or 4 class are mounted by a
qualified technician and experienced to the risks of lasers. This technician must stay around
during all the time the lasers work and he must be able to stop the units in case some
technical problems would occur. While the installation is on, the technician should wear
protective glasses.
Please remind the following remarks:
-
Laser light is different from any other light source with which you may be familiar. The light
from this product can potentially cause eye injury if not set up and used properly.
-
Laser light is thousands of times more concentrated than light from any other kind of light
source. This concentration can cause instant eye injuries, by burning the retina. Even if you
cannot feel heat from a laser beam, it can still injure or blind you or the audience.
-
Never look at the laser aperture or laser beams.
-
Do not direct the laser beam to people.
-
Do not leave the device running without the presence of qualified professionals.
EXPELEC cannot be liable for damages caused by incorrect installations and unskilled
operation.
TECHNICAL SPECIFICATIONS

Voltage : AC220V-240V / 50-60Hz / Fusible : 2A/250V

Consumption : 30W

Laser : 480mW@450nm, Blue DPSS laser

Working modes: DMX, Sound-Active, AUTO, Master/Slave

DMX channels: 7

Graphics & effects: more than 100 patterns, over 300 effects

Interface: 3-pin XLR jack for DMX or Master-Slave linking
 Dimensions : 240 x 220 x 140mm

Weight : 3.5kg
FEATURES
1. Various working modes : DMX, Sound-Active, AUTO, Master/Slave
2. Various programs : different working modes have different programs
3. DMX control with blackout function
4. Master/Slave function : the system allows link many units (as slave units) together to do
synchronized hobs without console in Sound-Active or AUTO mode
5. LED indicating and shut-off function : in Sound-Active mode, the unit’s panel had LED
indicating for Sound-Active. The unit will shut off after 8 seconds when the music stops.
6. DPSS laser : this unit has a Diode-Pumped Solid State’ to stable output and long working life.