Nicols BIRDY 300 LED, User Manual

Page: 16 / 22


DMX ADDRESS - DMX512 address setting
Select Addr , press ENTER button to confirm, the present address will blink on the display, use UP and DOWN button to adjust the address from 1
to 512 , press ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

CHANNEL MODE
Select
ChMd , press ENTER to confirm, present channel mode will blink on the display. Use UP and DOWN button to select 8 or 11, press ENTER
button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SHOW MODE
Select
ShMd , press ENTER to confirm. Use UP and DOWN button to select Show 1 (Sh1), Show 2 (Sh 2), Show 3 (Sh 3) or Show 4 (Sh 4). Press
ENTER button to store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SPLIT COLOR MODE
Select
SPLC , press ENTER to confirm. Use UP and DOWN button to select Yes (split color mode) or No (normal). Press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SLAVE MODE
Select
SLMd , press ENTER to confirm. Use UP and DOWN button to select Slave 1 (normal) or Slave 2 (2-light show). Press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

BLACKOUT MODE
Select
BLMd , press ENTER to confirm. Use UP and DOWN button to select YES (blackout) or NO (normal). Press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SOUND STATE
Select
SoUn , press ENTER to confirm. Use UP and DOWN button to select ON (sound on) or OFF (sound off). Press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

SOUND SENSE
Select
SOSe , press ENTER to confirm. Use UP and DOWN button to adjust sound sensitivity from 0 to 100 Press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.

PAN INVERSION
Select
IPAn , press ENTER to confirm. Use UP and DOWN button to select YES (PAN inversion) or NO (normal). Press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu mode.

TILT INVERSE
Select
ItIL , press ENTER to confirm. Use UP and DOWN button to select YES (tilt inversion) or NO (normal). Press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.

LED DISPLAY
Select
Lld , press ENTER to confirm. Use UP and DOWN button to select ON (LED on) or OFF (LED off). Press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.

DISPLAY
Select
DISP , press ENTER to confirm. Use UP and DOWN button to select DISP (normal) or DSIP (inversion). Press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
DISP: display normal mode if fixture set on the floor
DSIP: display inversion mode if fixture fixed at the ceiling

FOCUS POSITION
Select
FAdJ , press ENTER to confirm. Press ENTER again, the unit will run the built-in program for the focus positioning. Pess MENU button back
to the last menu or let the unit idle one minute to exit menu mode.

FUNCTION DELAY
Select
Fude , press ENTER to confirm. Use UP and DOWN button to select the delay time: 0 (no delay) or 1/2/3 (wait for 1/2/3 seconds before
these functions of 8/11 CH are activated/deactivated). Press ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.

DIMMER CALIBRATE
Select
dCAL , press ENTER to confirm. Use UP and DOWN button to calibrate the dimmer for a maximum output from 50 (limited to 50% of the
really max output) to 100 (maximum output is not limited). Press ENTER button to store. Press MENU button back to the last menu or let the unit
idle one minute to exit menu mode.