Beam Editor
Advanced: each fixture is split up into beams and beam features. Each beam feature
contains min/max and on/off values which are set automatically by Wolfmix. These
values are calculated by the fixture profile and should not require changing. However if
there is a fault with the fixture profile or a special case, some of these values can be
edited via the Beam Editor screen.
Displayed data:
●
A list of all beams.
●
A list of features on the selected beam.
●
The beam features min/max and off/on DMX values.
Encoder actions:
●
Move the first encoder to select a beam.
●
Move the second encoder to select a beam
feature
.
●
Move the third encoder to adjust the
min
and
max
DMX values for the selected
feature. Tapping the encoder will toggle between the
min
and
max
values. To
invert the feature, set the
min
value higher than the
max
value.
●
Move the fourth encoder to select the
off
and
on
values. Tapping the encoder
will toggle between the
off
and
on
values.
45
