4201PL 1-10V Analog Adapter
User’s Manual
8
Rev.1.0
4 Device
Description
The 4201PL 1-10V Analog Adapter is a electronic ballast PWM output adapter
for LonWorks network in automation. Its peripheral scope has been specially
designed for the use as fluorescent light controller for device spreading control
of applications such as lighting control.
For the use in lighting the the 4201PL 1-10V Analog Adapter realizes one
independent output channel with one relay output to control conventional
switch.
The LonMark object available per channel flexible use of the the 4201PL 1-10V
Analog Adapter;Furthermore there are several timer functions for the operation
by switch function. The configuration of the lighting control application is
effected via a plug-In.
Of course, the 4201PL 1-10V Analog Adapter is also freeing programmable in
Neuron C. As a flash module is used the application can be load via the
LonWorks network, for the detail please direct contact us.
4.1
Hardware Survey
The the 4201PL 1-10V Analog Adapter disposes of one output circuit for
each. The output circuit can be controlled individually relay output
8A
@90~260VAC.
4.2
Operation and Display Elements
The 4201PL 1-10V Analog Adapter is fitted with a service button
accessible via a small gap on the front panel (see Figure. 1.1,
A
).
Activation of the buttons generates a service-pin message transmitted via
the LonWorks network. The processor status as well as the service-pin
status are displayed by the service LED (figure. 1.1.
6
), which is on while
the service button is activated. By use the network management function
Wink the service LED flashes.
Furthermore the 4201PL 1-10V Analog Adapter is fitted with a reset LED
(figure. 1.1,
6
), displaying the availability of device occur reset. The LED is
connection to an I/O pin of the Neuron chip processor.
