4201PL 1-10V Analog Adapter
User’s Manual
14
Rev.1.0
6 System
Objects
This chapter describes the LonMark objects implemented in the 4201PL 1-10V
Analog Adapter. For each it states the network variable les used, special
configuration properties, general object properties, response during
modification of the configuration and after a reset, and, if available, further
object properties.
6.1
Node Object
The functionality of the node object is defined in the Application Layer
Guidelines of LonMark Interoperability Association
(
www.lonmark.org
).
Network Variables
NV Name
NV Type
Comment
nviRequest
SNVT_obj_request
Status request
nvoStatus
SNVT_obj_status
Status response
nvoAlarm
SNVT_alarm
Alarm generating
nvoFileDirectory
SNVT_address
Address of file for parameterization
6.2
Lamp Actuator Object
Network Variables
NV Name
NV Type
Comment
LampValue
SNVT_switch
Input value of lamp value
LampValueFb
SNVT_switch
Feedback value of current lamp value
Configuration Properties
CP Name
CP Type
CP Index
Comment
Location
SCPT_location
17
Additional free comment
SCPTrampDownTm SCPTrampDownTm
Dimming down delay time
SCPTrampUpTm
SCPTrampUpTm
Dimming up delay time
SCPTobjMajVer
SCPTobjMajVer
Major version of firmware
SCPTobjMinVer
SCPTobjMinVer
Min version of firmware
SCPTmaxRcvTime
SCPTmaxRcvTime
Heartbeat
SCPTdefOutput
SNVT_switch
Default output value
