SpoTel Series Voice Gateway:-‐ User Manual
34
from 0-15
Description
Port group description,its purpose is so you can identify the
port group with a meaningful name
Primary/Secondary Display Name
Port group display, which will be used in SIP message,
example:
INVITE sip:[email protected] SIP/2.0
Via:SIP/2.0/UDPpc33.atlanta.com;branch=z9hG4bK776as
dhds Max-Forwards: 70
To: Bob <sip:[email protected]>
From: Alice <sip:[email protected]>;tag=1928301774
Here Bob and Alice is the display
Primary/Secondary SIP User ID
User account information, provided by VoIP service
provider (ITSP). Usually in the form of digit similar to
phone number or actually a phone number.
Primary/Secondary Authenticate ID
SIP service subscriber’s Authenticate ID used for
authentication. Can be identical to or different from SIP
User ID.
Primary/Secondary Authenticate Password
Password of SIP user ID
Off-hook Auto-Dial
Set Auto-dial number to complete one stage dialing.
Auto-Dial delay time
Delay time of FXO port send auto-dial number.
Port Select
It specifies the policy for selecting port in a port group
Ascending: the system always selects a port from the
minimum number. The preferential selection of the port
can be realized through this mode
Cyclic ascending: when system selects ports’ Priority, it
always begin from the number next to the number
selected last time, if the maximum priority number is
selected last time, then the next number is the minimum
priority number, and move in cycles like this
Descending: when system selects ports’ priority, it
always begin to select from the maximum priority
number
Cyclic descending: when system selects ports’ Priority, it
always begin from the number before to the number
selected last time, if the minimum priority number is
selected last time, then the next number is the maximum
priority number, and move in cycles like this
Group ring: all ports ringing at the same time
Pick Up on Group
Press “*# +extension number” to decide which extension
on the phone.
Port
Add some ports to the same group