Instructions and warnings for users of the
WINGO gear motor
gear motor
for swing gates
wingo
✄
GB
Congratulations
on choosing a Nice product for your automation
system!
Nice S.p.A. produces components for automating gates, doors,
shutters and awnings: gear motors, control units, radio control units,
flashing lights, photocells and accessories.
Nice only uses first rate materials and production processes and
constantly develops innovative technical, aesthetic and ergonomic
solutions in order to make its products as simple to use as possible:
your fitter will certainly have chosen the most suitable article for your
requirements from the large range of Nice products.
Nice however, is not the producer of your automated system as this is
the result of a process of analysis, evaluation, choice of materials and
installation performed by your fitter.
Each automated system is unique and only your fitter has the experience
and professionalism required to create a system that is tailor-made to
your requirements, featuring long-term safety and reliability, and, above
all, professionally installed and compliant with current regulations.
An automated system is handy to have as well as being a valid security
system. Just a few, simple operations are required to ensure it lasts for
years.
Even if your automated system satisfies regulatory safety levels, this
does not eliminate “residue risks”, that is, the possibility of dangerous
situations being generated, usually due to irresponsible or incorrect use.
For this reason we would like to give you some suggestions on how to
avoid these risks:
•
Before using your automated system for the first time
, ask
your fitter to explain how residue risks can arise and spend a few
minutes reading the
instructions and warnings for the user
handbook that the fitter will have given you. Keep this manual for
future use and, if you should ever sell your automated system, hand it
over to the new owner.
•
Your automated system is a machine which carries out your
commands to the letter
; irresponsible or incorrect use may cause
it to become dangerous: do not move the automated system if
animals or objects are in its working radius.
Summary of Contents for Wingo
