Nice TOO Series, Instructions And Warnings For Installation And Use

Page: 11 / 44

WARNINGS: • All technical specifications stated in this section refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right
to apply modifications to products at any time when deemed necessary, while maintaining the same intended use and functionality.
MODEL TOO4500 TOO4524 TOO3000 TOO3024
Motor voltage [V] 230 24 230 24
Frequency [Hz] 50 DC 50 DC
Max gate length [m] 4.5 4.5 3 3
Max gate weight (kg)
250 250 300 300
IP protection rating
54 54 54 54
Operating temperature [C°] -20 to +50 -20 to +50 -20 to +50 -20 to +50
Weight of motor [kg] 6 5.5 6 5.5
Speed [m/s] 0.016 0.014 0.016 0.014
Travel [mm]
500 500 400 400
Capacitor [mF] 7 - 7 -
Nominal current draw [A] 1.1 1.1 1.1 1.1
Maximum current draw [A] 1.5 5 1.5 5
Nominal power draw [W]
250 30 250 30
Maximum power draw [W]
340 120 340 120
Nominal force [N] 300 300 300 300
Maximum force [N] 2000 1800 2000 1800
Cycles (cycles/hour) 24 continuous 24 continuous
Control unit
A60 MC424L A60 MC424L
Dimensions [mm]
800 x 100 x 177 h 800 x 100 x 177 h 800 x 100 x 177 h 800 x 100 x 177 h
9
TECHNICAL SPECIFICATIONS
CE Declaration of Conformity and declaration of incorporation of partly completed machinery
Declaration in accordance with the following Directives: 12004/108/EC (EMC); 2006/42/EC (MD) annex II, part B
Note
– The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquarters
and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for edito -
rial purposes. A copy of the original declaration can be requested from Nice S.p.A. (prov. of Treviso) Italy.
Declaration number:
507/TOO
Revision:
0
Language:
EN
Manufacturer's Name: NICE s.p.a.
Address:
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Person authorized to compile the technical documentation: NICE s.p.a.
Type of product:
Telescopic motor for swing gates
Model / Type: TOO3000, TOO3024, TOO4500, TOO4524
Accessories:
The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the products identified above
comply with the provisions of the following directives:
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of
the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with follow-
ing harmonised standards: EN 61000-6-2:2005, EN 61000-6-4:2007
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC
(recast), in accordance with the following harmonised standards:
• I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC
and that the following essential requirements have been satisfied: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7-
1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to submit pertinent information on the partly completed machinery to the national authorities, in response to a
motivated request, without affecting its intellectual property rights.
• If the partly completed machinery is operated in a European country with an official language other than the language used in this dec-
laration, the importer must include a translation with this declaration.
• The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to
the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards: EN 60335-1:2012; EN 60335-2-103:2003 +A1:2009
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 9 May 2014 Mr. Mauro Sordini
(Chief Executive Officer)
EN
English –
4