ENGLISH –
21
8.3 CONNECTING THE PS324 BACK-UP BATTERY
The control unit is configured for being powered with PS324 back-
up batteries that intervene in case of a power outage.
f
Before installing a back-up battery, disconnect the
power supply to the control unit.
Before installing and connecting the back-up battery:
1.
remove the cover of the control unit’s containment box
2.
insert the connector coming from the back-up battery into
the slot (
A
) on the control unit
A
26
3.
put the cover of the control unit’s containment box back on.
At this stage, the control unit can be powered again.
8.4 CONNECTING THE SOLEMYO SYSTEM
The control unit is configured for being powered with the “Solemyo”
photovoltaic power system (photovoltaic panel and 24 V battery).
To connect the Solemyo battery to the control unit, use the same
connector (
A
) normally used for the back-up battery.
A
27
a
When the automation is powered through the
“Solemyo” system, IT MUST NOT BE POWERED
through the mains electricity at the same time.
a
The “Solemyo” system can only be used if the
“Stand-by all” function is enabled (ON) on the
control unit.
PRODUCT MAINTENANCE
9
9
PRODUCT MAINTENANCE
Being an electronic part, the control unit does not require any
special maintenance. Nonetheless, the system should be
regularly checked to ensure that it works efficiently at least every
6 months according to the instructions in the “
” chapter.
PRODUCT DISPOSAL
10
10
PRODUCT DISPOSAL
l
This product is an integral part of the operator and
must therefore be disposed of with it.
As with the installation, only qualified personnel must dismantle the
product at the end of its life.
This product is composed of different types of materials. Some
of these materials can be recycled; others must be disposed of.
Please enquire about the recycling or disposal systems in place in
your local area for this type of product.
a
WARNING
Some parts of the product may contain polluting or
dangerous substances. If not disposed of correctly,
these substances may have a damaging effect on
the environment and human health.
l
As indicated by the symbol shown
here, this product must not been
disposed of with household
waste. Separate the waste for
disposal and recycling, following
the methods stipulated by local
regulations, or return the product
to the seller when purchasing a
new product.
a
WARNING
Local regulations may impose heavy penalties if
this product is not disposed of in compliance with
the law.
Summary of Contents for MC824HHS
Page 1: ...Nice MC824HHS Control unit EN Instructions and warnings for installation and use...
Page 24: ...24 ENGLISH NOTES...
Page 26: ...26 ENGLISH NOTES...
Page 27: ...ENGLISH 27 NOTES...