ENGLISH_
53
The example below shows
the connection of 2 sirens.
The example below
shows the connection of
a single siren.
WARNING:
use at max o two piezoelectric 115 dB
sirens.
EN
INSTALLING THE SIREN
13
Follow the connection schemes below to install 1 or 2 sirens.
S
Electrifier connectors
Electrifier connectors
S
Red wire
Siren
Siren1
Siren2
Black wire
Red wire
Black wire
AUXILIARY RELAY
14
The auxiliary relay is activated whenever the system is triggered and its
activation time is the same time set up to trigger the siren. However,
this relay does not generate an enable or disable beep, i.e. it is ideal to
interconnect the electrifier with the monitored centrals. It may also be
used to trigger the sirens in places where the enable/disable beep cannot
be used.
Note in the example below that the Relay will work as a switch, switching
the power grid and activating the installed load, which, in the case below
is a light bulb, but could be any other device. In order to connect 12V
devices such as sirens, just use a 12V source instead of the conventional
power grid.
