ENGLISH_
51
EN
INSTALLING THE WIRED SENSOR
SETTING UP - SENSIBILITY ADJUSTMENT
12
11
Locate the AJUSTE DE SENSIBILIDADE jumper and position it according
to the desired configuration. The instructions are also registered on the
product board.
In order to install the
WIRED sensors
, no type of setting is required.
The operation of the open or presence sensor is similar, for they inform
the violation of the Zone to the central by opening its contacts. These
contacts should be connected in series when more than one sensor
is used in the same Zone, forcing the electric current to run through all
sensors before returning to the central. This way, if any sensor detects a
violation, its contact will open and the current will be cut off, leading the
central to activate the siren, if enabled. Remove the zone jumper (jumper
JZ) to enable the input of wired sensors. See below an example of the
connections.
Minimum
sensibility
Medium
sensibility
Maximum
sensibility
