Nice HSDIM23, Instructions And Warnings For Installation And Use

Page: 6 / 60

EN
4
3.2 - Signals
HSDIM23 has 1 LED ( L1 - fig. 2 ) and a buzzer that emits acoustic signals. See table 3 .
The low battery signal is activated 15 to 30 days in advance before they are totally dis-
charged. However, the batteries should be replaced as soon as possible after this signal.
When the batteries are partially discharged, incorrect alarm signals may be generated.
Table 2
- Jumper Programming
Jumper Status Function
JP1 OPEN Alarm signal with single radio code
CLOSED
Consecutive second alarm signal with second radio code
Caution!
– When dip-switch 4 is set to OFF and dip-switch 5 set to ON this excludes
compliancy with standard EN50131
Table 3
LED Function
Red
Intrusion alarm
BUZZER
Function
1 Beep
Alarm signal (Intrusion, Tampering)
3+3 Beeps
Sensor programming (battery insertion)
5 Beeps
Low battery signal