English –
4
EN
02.
Check that the motor rotates in the desired
direction. If not, invert the black wire with the
red wire
RED
BLACK
DC
POWER SUPPLY
SEE LABEL ATTACHED TO EACH MODEL
RED
BLACK
+
+
-
-
RED
BLACK
-
+
5
LIMIT SWITCH ADJUSTMENT
During the up and down movements, the motor stops the shutter automatically when it reaches the limit switch positions: position “
0
” (shutter totally retracted)
and po sition “
1
” (shutter totally extended). The factory settings of these positions are very approximate, and therefore follow the procedure below to adapt them
to the specific dimensions of the roller shutter concerned.
IMPORTANTE! - Adjusting first limit position “0” and then limit position “1”
“
0
”
“
1
”
“
0
”
“
1
”
“
0
”
“
1
”
“
0
”
“
1
”
limit position “
0
”
limit position “
0
”
limit position “
0
”
limit position “
0
”
limit position “
1
”
limit position “
1
”
limit position “
1
”
limit position “
1
”
A
– motor on the left.
B
– rolling shutter in front of the roller.
A
– motor on the right.
B
– rolling shutter in front of the roller.
A
– motor on the left.
B
– rolling shutter behind the roller.
A
– motor on the right.
B
– rolling shutter behind the roller.
01.
Move the shutter to position “
1
”.
