ENGLISH –
3
PRODUCT DESCRIPTION
2
2
PRODUCT DESCRIPTION
The
BiDi-WiFi
accessory is a device that – by means of WiFi com-
munication – allows for controlling the movement and status of
Gate&Door-type Nice automations compatible with the BusT4.
a
CAUTION! – Any use other than that specified here
-
in or in environmental conditions other than those
stated in this manual is to be considered improper
and is strictly forbidden!
2.1 LIST OF CONSTITUENT PARTS
Figure
shows the main parts making up the
BiDi-WiFi
.
A
B
C
D
E
1
A
Data Connection LED
B
PAIRING button
C
RESET button
D
Power LED
E
Control Unit CONNECTOR
INSTALLATION
3
3
INSTALLATION
3.1 PRE-INSTALLATION CHECKS
a
The installation must be carried out by qualified
personnel in compliance with the current legisla-
tion, standards and regulations, and with the in-
structions provided in this manual.
a
CAUTION! – If the BusT4 connection is used for the
IBT4N interface, BiDi-WiFi cannot be connected to
the control unit.
Before proceeding with the product’s installation, it is necessary to:
–
check that you have a Nice automation control unit of the Gate&-
Door catalogue equipped with BUS T4 connector (IBT4N). Con-
trol unit with phone connector RJ11 are not supported by
Bi-
Di-WiFi
(“
Figure
RJ11
2
–
you have a smartphone with Android 6.0.2 or higher
–
you have installed and configured the application
MyNice Pro
on the smartphone, you can download the App from Play Store.
3.2 INSTALLATION
To install
BiDi-WiFi
:
–
disconnect the power supply from the automation’s control unit
(“
Figure
“)
–
all LEDs on the automation’s control unit should be off before
continuing
OFF
3
–
if present, remove the plastic pre-cut element (
A
) from the IBT4N
connector and check that there are no burrs (“
Figure
A
4
