EN - 64
7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your freezer will warn you if the temperatures for the freezer is at improper levels or if a
problem occurs with the appliance. Warning codes are displayed in the freezer indicator.
ERROR TYPE
MEANING
WHY
WHAT TO DO
[Sr]
"Failure" Warning
There is/are some
part(s) out of order or
there is a failure in the
cooling process.
The product is plugged
for the first time or
a long-time power
interruption for 1 hour.
Check the door is open or not and check
if the product working 1 hour. If the door
is not open and the product had worked
1 hour, call service for assistance as
soon as possible.
[Sr] – Set
value blink
on freezer set
value screen
Freezer compartment is
not cold enough
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time.
1. Use food within a short time period.
Do not freeze foods that has thawed.
2. Set the freezer temperature to colder
values or set the Super Freeze until
the compartment gets to normal
temperature.
3. Do not put fresh food in the appliance
until the fault has cleared.
"[--]"
"Low voltage" Warning
This is seen when the
power supply becomes
lower than 170 V.
This not a failure. This prevents any
damage to the compressor. This warning
will clear after the voltage reaches the
required level.
If you are experiencing a problem with your
freezer, please check the following before
contacting the after-sales service.
Your freezer is not operating
Check if:
•
There is power
•
The plug is correctly placed in the socket
•
The plug fuse or the mains fuse has
blown
• The socket is faulty. Examine this by
plugging your freezer into a working
socket.
A rise in the temperature may be caused
by:
•
Opening the doors frequently for long
periods of time
•
Loading the appliance with large
quantities of warm foods
•
A high ambient temperature
•
An error with the appliance.
Your freezer is operating noisily
Normal noises
Cracking (ice cracking) noise occurs:
•
During automatic defrosting
•
When the appliance is cooled
or warmed (due to expansion of
appliance material).
Short cracking noise occurs:
When
the thermostat switches the compressor
on/off.
Motor noise:
Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
when it is first activated.
Bubbling noise and splash occurs:
Due to the flow of the refrigerant in the
tubes of the system.
Water flowing noise occurs:
Due
to water flowing to the evaporation
container. This noise is normal during
defrosting.
Air blowing noise occurs:
In No-Frost
freezers during normal operation of the
system due to the circulation of air.
Summary of Contents for CVSM1860D
Page 67: ...EN 67...
Page 68: ...52296726...
