Nibe VPB S Series, User'S And Installer'S Manual, Page: 15 / 24

DIRECT-CURRENT ANODE
VPB S/ VPBS S Enamel is equipped with direct-current
anode and enclosed with potentiostat from the factory.
The anode cable (W1) is installed in the anode from the
factory and only needs to be connected to the potentio-
stat.
1.
Route the anode cable (W1) along the docking pipe,
supply line (XL8).
2. Connect the anode cable (W1) to the potentiostat.
3.
Connect the potentiostat to a suitable 230 V wall
socket.
NOTE
The cable between the potentiostat and the
anode must either be extended or shortened.
The figure shows VPB S200 enamel
LEK
LEK
W1
W1
XL8
15 Chapter 3 | For the Installer NIBE VPB S/ VPBS S