5
RCU 11
Quick start guide
Check the computer’s IP address as follows:
Press ”Start” – ”Run”- type ”cmd” + enter. A dos
window now opens
Type”ipconfig” + enter
The computer’s IP address and Subnet Mask will be
shown
For example
IP address: 10.1.0.0
Subnet mask 255.0.0.0
Assign an IP-address if the computer does not have
one.
Connect the power adapter to a wall socket and
check that the LEDs light. “Status” should light
green, “Serial Link” should flash and “Link” must
light orange (100Mbps) or green (10Mbps) if the
network cable is connected.
Turn on the computer and insert the CD supplied
and follow the instructions.
Start the configuration program Netbiter config. The
program automatically searches for RCUs connected
to the network. If the program does not find the
RCU refer to the Troubleshooting section. If Netbiter
is already running and it is started no RCU is found.
7
6
8
9
Status
Serial Link
Activity
Link
Supply
V
oltage 9-32
VA
C/DC
, 1
W
A
R
T#
: 0120 9
999
0
1
M
ac
ID
: 00:30
:11:F
B:01
:3
5
NETBITER
MODBUS
T
CP/
R
TU
G
A
TE
W
A
Y
MADE I
N SWEDEN
45:2
003
LE
K
LEK
LEK
Äldre bild
