Nibe PV 3031, Installer Manual

Page: 12 / 28

x 10
LEK
LEK
Coach bolt M10
Flashing tape
Rubber washer
L profile
Nut M10
2. Install the L profile on the protruding coach bolt with
M10 nuts.
Caution
The coach bolt should be installed from under-
neath before the plate is mounted on the roof.
Caution
Never use the installed roof brackets as a lad-
der!
Installing the mounting rails
Mounting rails are secured in the roof brackets with T
bolts and locking nuts (8 mm).
Caution
Check that the head of the T-bolt is vertical in
the mounting rail after tightening.
The rectangular hole in the roof bracket permits optim-
al height adjustment of the mounting rail.
Adjustment of the mounting rail height
Adjust the first mounting rails installed in relation to
each other and the roof cladding. Then fix the mount-
ing rail to the roof bracket by tightening the nut.
Tightening torque 12-15 Nm.
PV Solar package Chapter 4 | Mounting 12