Remove the roof tiles
Mark out the positions for the roof brackets using chalk.
Remove or slide up the marked roof tiles.
Upper groove
Lower groove
Roof bracket
Tongue
and
groove/
Truss
X
X
Installing the roof brackets in the eaves
Secure each roof bracket in the eaves with 3 x wood
screws (6x80 mm). 2 x screws are located in the lower
groove and 1 x screws are located in the upper groove.
NOTE
The distance to the edge (X) must be the same
on both sides.
Installing the roof brackets in tongue and
groove
Secure each roof bracket with 6 x stainless steel con-
struction screws (6.5x50 mm), divided between both
grooves.
Spacer
plate
Batten
Wood
screw
Tongue
and
groove/
Truss
Roof tile
Roof bracket
Installing the spacer plate
The roof bracket must not press directly into the roof
tile. Use a spacer plate!
The spacer plate must be made of a water and weather
resistant material.
PV Solar package
Chapter 4 |
Mounting
10
Summary of Contents for PV 3031
