Nibe PV 3031 3 kW, Installer Manual

Page: 10 / 28

LE
K
Overview
The adjacent image illustrates when PV Solar package
is installed on a house roof.
NOTE
Ensure that the strength and load capacity
of the roof structure are sufficient.
NOTE
If there is not a sufficiently stable substructure
such as tongue and groove or trusses to allow
a durable installation the roof must be rein-
forced.
Roof bracket, stainless
steel
Mounting rail, horizontal
Joint with rivet
Solar panel
End clamp
System overview, installation components
1.
2.
3.
4.
5.
5
.
6.
19 mm
Roof bracket location
1
4
5
5
2
3 6
24 mm
Before installing solar panels
1.
Number of rows of installed solar panels x height
of solar panels (plus distance between the solar
panels where relevant).
2.
Number of solar panels installed horizontally x
(solar panel's width + 24 mm) + 31 mm.
3.
The horizontal distance between the mounting
points for the roof brackets.
4.
Solar panel height
5.
Mounting points' vertical location = 1/4 panel
length.
6.
Max distance between the last roof bracket and
the end of the mounting rail = 200 mm
PV Solar package Chapter 4 | Mounting 10
4 Mounting