Cleaning the heat pump filter
The heat pump filter should be cleaned every month. An alarm will flash every 3
months as a reminder. Here are the steps to follow when cleaning the filter:
Set the switch to 0
1
Remove the top cover by pulling the lower section
outwards and then lifting it off and pull the filter
cassette out
2
Above are photos of dirty and clean filter
Remove the filter and clean it. It can be cleaned by
hoovering or removing the material and washing it
with water
3
Check the filter is not damaged and carefully
replace it
4
Re-assemble the filter cassette checking it has been
fitted correctly. Replace it in the heat pump
5
Replace the upper cover of the heat pump
6
Set the switch back to 1
7
Page 5
