Setting the
temperature
The heating should have
been set before you moved
in to the property. If you need
to adjust the temperature
turn the dial up (+) or down
(-). Note- it can take up to
24 hours for a temperature
change to be noticeable. It is
recommended the dial is not
set lower than -3 (shown in
photo) or higher than +3. It
has been set by an engineer
to 0.
Setting the season
Winter
mode is the recommended year-round setting
- and especially between September and April - as it
will automatically adjust the system to suit changes in
outdoor temperature
The following settings can be used at your
discretion:
Use
summer
mode during the summer - the heat pump
will produce hot water only
Use
spring/autumn
mode for the rest of the year – the
heat pump will produce heating and hot water
Press this
button to
select the
season.
Press this button to
return
Extra hot water
(immersion heater)
The immersion can be used to give more hot water. This
will increase energy and running costs so should be used
sparingly.
Press this button to scroll through options. It is suggested
you use the 3 hr option and turn it off again when you have
hot water
Page 4
