5 Glossary
Additional heat
The additional heat is the heat produced in addition to the heat supplied
by the compressor in your heat pump. Additional heaters can be for ex-
ample, immersion heater, electric heater, solar power system,
gas/oil/pellet/wood burner or district heating.
Ambient temperature sensor
A sensor that is located outdoors on or close to the heat pump. This sensor
tells the heat pump how hot it is where the sensor is located.
Balance temperature
The balance temperature is the outdoor temperature when the heat
pump’s stated output is equal to the building’s output requirement. This
means that the heat pump covers the whole building’s output requirement
down to this temperature.
Charge coil
A charge coil heats the domestic hot water (tap water) in the water heater
with heating water (heating medium) from AMS 10.
Charge pump
See "Circulation pump".
Circulation pump
Pump that circulates liquid in a pipe system.
Climate system
Climate systems can also be called heating systems. The building is heated
using radiators, under floor coils or convector fans.
Coil tank
A heater with a coil in it. The water in the coil heats the water in the
heater.
Compressor
Compresses the gas state refrigerant. When the refrigerant is compressed,
the pressure and the temperature increase.
AMS 10
Chapter 5 |
Glossary
20
