Nibe AHP S300, Installer Manual

Page: 17 / 28

NOTE
Electrical installation and service must be car-
ried out under the supervision of a qualified
electrician. Electrical installation and wiring
must be carried out in accordance with the
stipulations in force.
Sensors
AHP S/ AHPS S/ AHPH S can be supplemented with up
to two hot water sensors. These are placed in the sub-
merged tube for hot water sensor (UA1) and (UA2).
AHPS S300 and AHPH S300 has sensor BT6 fitted in
submerged tube UA2 at the factory.
AHPS S300 can also be supplemented with a solar
sensor. This is placed in the submerged tube for solar
sensor (UA3).
Use the sensors provided with the heat pump (or other
heat source). When no heat sensors have been provided
these must be ordered from the manufacturer of the
heat source.
The figure shows AHPS S300.
UA2
UA3
UA1
BT6
17 Chapter 5 | Electrical installation AHP S/ AHPS S/ AHPH S
5 Electrical installation