Nibco PEX Plumbing Installation Manual Download Page 11

Page: 11 / 20

Sub-Head

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com

www.nibco.com

A H E A D O F T H E F L O W

PUSH ‘N GO

Installation Instructions

Step 1

Get your pipe and fitting ready to connect.

Step 2

Push pipe into the fitting until it stops and you’re done.

Features and Benefits

• Quick-connect fittings that can be used in potable water systems.

• Made of polyphenylsulfone which has been proven in extensive tests for cleanliness, pressure, flow,

longevity, chemical exposure and chlorine resistance.

• Works with plastic CTS tubing.

• No tools, crimp or solder required. Simply push pipe into fitting.

• Easy to disassemble - Push in gripper ring and pull out pipe.

• Available from 1/2” through 3/4”

• Locking clips available for behind the wall installation.

Performance Standards

ASTM F877

Cross-linked polyethylene plastic hot- and cold-water distribution systems

NSF-PW

Combination of performance and health effects standards for fittings to be used with potable water

Our NIBCO Push ‘N Go fittings are designed for a quick and hassle-free installation. No tools, crimp or solder is required. These poly-

phenylsulfone fittings are sturdy enough to handle projects for plumbing systems and quick fixes. It is recommended that Push ‘N Go

fittings be used only with plastic CTS tubing. Disassembly is easy as well. Simply push in the gripper ring and pull out the pipe. No

special tool is required.

Summary of Contents for PEX





















Search results

Summary of Contents for PEX

Reviews:

Related manuals for PEX

Brands by name

Popular brands

Nibco PEX, Plumbing Installation Manual

Search results

Summary of Contents for PEX

Reviews:

Related manuals for PEX

Brands by name

Popular brands