Figure 16. Trigger Configuration in MAX
Fan Configuration in MAX
You can configure fan behavior using software settings in MAX
The PXIe-1083 supports both Auto and High fan modes for both the 38 W and 58 W cooling
profiles. Refer to the
Fan Mode
section for more information about these modes.
You may also select a Manual fan mode. In this mode, you may manually set the fan speeds to
achieve the desired performance.
Note
You may not set the fan speeds or power settings lower than the minimum
level required to maintain required cooling levels.
Complete the following steps to change the fan settings in MAX .
1.
In the Configuration tree, click on the PXI chassis you want to configure.
2.
In the right-hand pane, click on the
Settings
tab.
3.
In the
Fans
group, select the desired Mode and Cooling Profile using the drop-down
menus.
24
|
ni.com
|
PXIe-1083 User Guide