©
National Instruments Corporation
C-1
C
Removing the NI PXI-4204
This section provides details about removing an NI PXI-4204 device from
MAX and from a PXI chassis.
Note
You must physically remove the NI PXI-4204 from the chassis before you can
remove it from MAX.
Removing the NI PXI-4204 from a PXI Chassis
Consult the PXI chassis documentation for additional instructions and
cautions. To remove the NI PXI-4204 device from a PXI chassis, complete
the following steps while referring to Figure C-1:
1.
Power off the PXI chassis. Do
not
remove the NI PXI-4204 device
from a chassis that is powered on.
2.
Rotate the mounting screws that secure the NI PXI-4204 to the chassis
counter-clockwise until they are loose, but do not completely remove
the screws.
3.
Remove the NI PXI-4204 by pushing down steadily on the
injector/ejector handle until the device disengages from the chassis.
4.
Slide the device completely out.
The next time you restart the computer the NI PXI-4204 will have a red
circle with a white
X
inside it next to the device in MAX.
