manualshive.com logo in svg

NI myRIO-1900, User Manual And Specifications, Page: 24 / 32

Share
Download
NI myRIO-1900 User Manual And Specifications Download Page 24

24

|

ni.com

|

NI myRIO-1900 User Guide and Specifications

+15 power output

Output voltage...........................................+15 V to +16 V
Maximum current .....................................32 mA (16 mA during startup)

-15 V power output

Output voltage...........................................-15 V to -16 V
Maximum current .....................................32 mA (16 mA during startup)

Maximum combined power from +15 V
and -15 V power output ....................................500 mW

Power Re

q

uirements

NI myRIO-1900 requires a power supply connected to the power connector.

Caution

You must use either the power supply provided in the shipping kit, or 

another UL Listed ITE power supply marked 

LPS

, with the NI myRIO-1900.

Power supply voltage range..............................6-16 VDC

Maximum power consumption .........................14 W

Typical idle power consumption.......................2.6 W

Environmental

To meet these specifications, you must operate the NI myRIO-1900 with the window facing 
away from the mounting surface and ensure that there is at least 1 in. of clearance in front of the 
window during use.

Ambient temperature near device
(IEC 60068-2-1, IEC 600682-2).......................0 to 40 °C

Storage temperature
(IEC 60068-2-1, IEC 600682-2).......................-20 to 70 °C

Operating humidity (IEC 60068-2-56) .............10 to 90% RH, noncondensing

Storage humidity (IEC 60068-2-56) .................10 to 90% RH, noncondensing

Maximum altitude.............................................2,000 m

Pollution Degree (IEC 60664) ..........................2

Indoor use only.

Physical Characteristics

Weight ...............................................................193 g (6.8 oz)

Summary of Contents for myRIO-1900

































Reviews:

No comments