GPIB Hardware Installation Guide and Specifications
|
© National Instruments
|
9
4.
Insert the PMC-GPIB into the slot as shown in Figure 4. It might be a tight fit, but do not
force the board into place.
Figure 4.
Installing the PMC-GPIB
5.
Use the mounting hardware provided to fasten the PMC-GPIB to the host.
6.
Reinstall the host, if you removed it to install the PMC-GPIB.
7.
Power on your system.
The PMC-GPIB hardware installation is now complete.
1
Host Face Plate
2
3.3 V Keying Hole
3
5 V Keying Hole
4
PMC-GPIB Board
5
Mounting Screws
5
1
2
3
4
